Log interval differs from B3 settings

Sometimes when installing a node it happens that the log interval chosen in Boomerang is not sent to the node. This can be solved by either changing the log interval in Boomerang again, for example from 5 min -> 1 min, waiting to see that node starts to log with 1 minute interval and then changing it back to 5 min.

There is also another method if you have web access to the WIN gateway. In this case, set in WIN gateway the same value as the one set in Boomerang:

1. Go to “Advanced” -> “Details”.

2. Find your node in the list (look at the EUI ID)

3. Set the “SensorReadPeriod” as described in Sensor Read Period.