# Cables routing

For NWIN002 – NWIN005 nodes the blue hinge can be removed as described in [enclosure-opening](https://help.boomerang3.com/win-gateway-installation-manual/mechanical-installation/enclosure-opening "mention")for easy routing of cables.

A simple strain relief can be created by placing a cable tie wrap around the cable inside the enclosure, or between the enclosure walls in the cable slot as shown in the picture below.

<figure><img src="https://2429681196-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0vLm0km8knyJJgcLOzxB%2Fuploads%2FECfOIUXCsrN7Hx8B9SYY%2Fimage.png?alt=media&#x26;token=88dfac8c-3b94-4e73-aaf5-da4bf6cf9971" alt=""><figcaption></figcaption></figure>

For NWIN004 and NWIN005 nodes, cables can be tied to PCB holders with tie wraps as shown below.

<figure><img src="https://2429681196-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0vLm0km8knyJJgcLOzxB%2Fuploads%2FxGqX8V5PP31aeWVEz0eA%2Fimage.png?alt=media&#x26;token=a52ca586-0a32-4170-8fd3-dcf0ffdb9cab" alt=""><figcaption></figcaption></figure>