The message from S2GW if it did receive an answer from a node over radio saying it does not have the sensor requested. This happens if the sensor is disconnected from the node or faulty.
This message is sent in post with all the readings. The node is polled every time it is required by its period settings.
<Sensor>
<SensorID>5</SensorID>
<SensorIndex>0</SensorIndex>
<SensorType>9301</SensorType>
<Time>08/29/2024 13:33:35</Time>
<ErrorCode>2</ErrorCode>
<ErrorMsg>No sensor detected (node sends 0xAA)</ErrorMsg>
</Sensor>Last updated