Sensor not present

If S2GW receives answer from a node over radio during initialisation or when it collects the readings but the node says it does not have the sensor with a given index then it informs B3 about sensor being not detected.

The reasons can be the sensor is disconnected or faulty.

Radio communication log

[07/06/2024 10:06:19:251] [S2Sensor 3_1 : Sending] 09 11 3C 05 01 03 0E 01 45 
[07/06/2024 10:06:19:253] [S2Sensor 3_1 : Receiving] 14 10 4C 05 01 03 B6 01 AA 0C 00 00 00 00 00 00 00 00 00 9E 
[07/06/2024 10:06:19:254] [S2Sensor 3_1] No sensor detected (node sends 0xAA)

Part of POST to B3

<Sensor>
      <SensorID>3</SensorID>
      <SensorIndex>0</SensorIndex>
      <SensorType>9304</SensorType>
      <Time>06/07/2024 10:05:22</Time>
      <ErrorCode>2</ErrorCode>
      <ErrorMsg>No sensor detected (node sends 0xAA)</ErrorMsg>
    </Sensor>