Edit S2GW config

  1. To edit the S2GW configuration start MC and go to /boot/ICU/s2gw_config.xml

  1. Select s2gw_config.xml and double click “4 Edit” or press F4 to edit the file.

  1. Edit the settings and double click “2 Save” or press F2 to save the file.

  1. Double click “Save” or press Enter to confirm you want to save it.

  2. Double click “10 Quit” or press F10 to quit MC.

  3. After closing MC, you shall return to the command prompt.

PreviousTerminal connectionNextSet static IP

Last updated