# S2 Thermometer

S2 Thermometer may be used to read the sensor measurements directly from the measuring node. It may be used to calibrate or check the node and sensor.

The program works with digital and analogue temperature, digital humidity and ADC nodes.

A zip with the tool can be downloaded from: <https://icuscandinavia060.sharepoint.com/:f:/s/Technicalfile/ErdZPfykOzVAjdg3TJm06M4BU_EtSoPqY2XZA4H1sdIpYQ?e=dVXzO8>

To program the node:

* Unzip the files.
* Double click S2 Thermometer.exe to run it.
* Select the correct COM port.

<figure><img src="https://196065439-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDnSLeSlKbF06gUExzr9m%2Fuploads%2Ftgyl6LCU5CDP5vqiER8i%2Fimage.png?alt=media&#x26;token=67b05466-da65-447a-9af9-c563bf9d12a5" alt=""><figcaption></figcaption></figure>

* The readings shall be shown.