Connectors

The interface is mounted inside an enclosure identical with S2 node enclosure.

It has the following connectors:

The interface is delivered with a power splitter P/N RP002 that enables connection of S2 node and S2IOG2 interface to a single 9V power supply.

The S2 node communicates with S2IOG2 using the serial port. The serial cable P/N RD008 is delivered with the S2IOG2 module. The S2IOG2 requires S2 node firmware type 26 - see S2 node types.

S2 node with S2IOG2 interface - analogue inputs side

S2 node with S2IOG2 interface - serial cable, digital sensor, power