# Installation and configuration

Open path where you downloaded the installer, unzip it and run S2NodeSupervisor.exewith administrator privileges:

![](https://484688698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiNiSniGUwm4ZWDRNq1vl%2Fuploads%2Fgit-blob-6e500c1d195aa21e4d2da180b2a843a0212f9f72%2Fimage4.png?alt=media)

Click gear icon at the top right to open the settings:

![](https://484688698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiNiSniGUwm4ZWDRNq1vl%2Fuploads%2Fgit-blob-b3246fdc52ee3e7175d75ff633acbc502e4a1816%2Fimage5.png?alt=media)

The form opens where the default contents of the fields may be defined. These default values will be then filled in into the service form during its creation:

![](https://484688698-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FiNiSniGUwm4ZWDRNq1vl%2Fuploads%2Fgit-blob-70414151dcdad7c71036a1a8a18145015017bf6f%2Fimage6.png?alt=media)

| **Form item**                       | **Contents / function**                            |
| ----------------------------------- | -------------------------------------------------- |
| Default service name                | No spaces, up to 50 characters.                    |
| Default service description         | Any text.                                          |
| Boomerang server address            | URL address of B3 server S2 receiver page.         |
| “Open application log” button       | Opens NodeServer Supervisior application log file. |
| “Open services log location” button | Opens services log file location.                  |

Click “Save settings and close” button to save or “Close” button to cancel.