# For B3

#### For B3

The form for B3, shown below, does not present the system alarm limits and card thresholds are not used.

![A picture containing chart Description automatically generated](https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/vwXtvNddN65AP4Oy0TZU/Unknown%20image)

1. Select the Transport Measuring Point from the “Sensor” list.
2. Click “Next >>” to proceed.
3. In case no target sensor is selected for a fragment a message box will appear:![Graphical user interface, text, application, email Description automatically generated](https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/5r9GmLjFFiTQmNMVqJsB/Unknown%20image)

To correct it, select the sensor and repeat the operation.