# Store mission

During the Store mission:

* the mission settings and measurements are read from the card,
* user defines the measurements time range(s) that will be exported to the monitoring system,
* user may check if there were any alarms during the mission basing on the card threshold limits,
* user selects the target B2 sensor or B3 measuring point the measurements will be exported to,
* user may add comment,
* the measurements are exported to the monitoring system and are stored there as a mission.

To store a mission, the Logger Card client must be logged into a monitoring system. If you are not logged in and try to store a mission, a warning will be displayed.