# Installation of 1-Wire drivers

The 1-Wire drivers are needed for communication with Logger cards using a USB Logger Card reader.

There are two separate installers for 32-bit (‘install\_1\_wire\_drivers\_x86\_v405.msi’) and 64-bit (‘install\_1\_wire\_drivers\_x64\_v405.msi’) operating systems.

To install 1-Wire drivers:

1. Double click the correct file to run the installer.
2. Follow the default installation by pressing “Next” button.

<p align="center"><img src="https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/Mffvc7atlMOSmJZx3MfW/Unknown%20image" alt=""></p>

3. Read and accept terms in the Agreement and press “Next” button.

<p align="center"><img src="https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/I0GeZ6aeHBM6mHOQInET/Unknown%20image" alt=""></p>

4. Leave default path or choose custom one and then press “Next” button.

<p align="center"><img src="https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/yMLUN4JN4Ct795a78kiT/Unknown%20image" alt=""></p>

4. Press “Install” button.

<p align="center"><img src="https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/MEKV8JXtvkYJdrWk26lj/Unknown%20image" alt=""></p>

4. Click “Finish” to close the installer after the installation is done.

<p align="center"><img src="https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/nlqPGRrs98N2NxLOzLYP/Unknown%20image" alt=""></p>