# FU002 - Logger Card Standard

![](https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/lVUH6bBxY4eUSQ1ikUNt/Unknown%20image)

The upper form part provides information about the current calibrator, the date of calibration and a comment.

To set an adjustment:

* enter adjustment value in “New adjustment \[°C]” field,
* optionally add a comment,
* click “Set” button to save the calibration settings in the sensor.

The message box will inform about the save procedure result:

![](https://content.gitbook.com/content/gejpyNLdjbUCpCURIFfT/blobs/MYSc4zsIjOkQkDik26f6/Unknown%20image)