# CO2

There is no acces port for CO2 sensor but the GMP251 sensor can be installed externally using a flow-through adapter, order code ASM211697SP.

<figure><img src="/files/htxrECK54wlmPRRkuQ0Y" alt=""><figcaption></figcaption></figure>

The flow-through option requires the flow in the range defined in the GMP251 datasheet.

<figure><img src="/files/e9hwHkmb7tAkkIKHynTl" alt=""><figcaption></figcaption></figure>

The flow measured in the incubator is around 0.4l/min and is in the middle of the recommended range.

The sensor is connected in series with the incubator CO2 filter using tubes. This shall be done by the incubator representative technician.

<figure><img src="/files/2sbgDtXJwbI6NZeNEw3e" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.boomerang3.com/external-sensors-in-incubators/ivftech-freygen/co2.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.