# Hardware configuration

Depending on the jumpers settings inside the unit, every of three output channels marked CH1, CH2 and CH3 can work as:

1. Normally opened (NO) isolated switch.
2. Normally closed (NC) isolated switch.
3. Power source on when condition is **true** (PS).
4. Power source on when condition is **not true** (NPS).

<figure><img src="https://1683511357-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FV2iO5pWD0jTdNo3roKtG%2Fuploads%2FyFpd6Zgx1AyYKdoszo1V%2Fimage.png?alt=media&#x26;token=393cb3d5-89e7-4c1a-a9bc-0c412f7ded2c" alt=""><figcaption></figcaption></figure>

All these modes are described in the following chapters.
