Move mission

You can move a completed mission from a real mission MP to a virtual mission MP.

This is optional. It is useful for organizing and alarm handling.

See Missions for real vs virtual mission MPs.

When to move a mission

Move missions when you need one of these:

• Different alarm limits per transport type.

• A simple category structure (product, carrier, recipient).

Example: keep the BTiny MP without limits. Create virtual MPs with different limits. Move each mission to the right virtual MP.

Move a mission

1

Open the mission object view

Go to Mission object view.

2

Select the mission

Select the mission from the mission list.

In this example, the mission is on TPatrol sensor 2. Its alarm limits are set to 2-8°C. All readings are within limits. There is no active alarm.

3

Open Move dialog

Click Move mission next to the mission list.

The Move to dialog opens. Select the target MP under Select Measuring Point.

In this example, the target MP is 2-6°C.

4

Move and sign

Click Move and sign.

The mission is removed from TPatrol sensor 2 and it appears under 2-6°C.

What changes after the move

The target virtual MP has alarm limits set to 2-6°C. Its Alarm filter is set to 1.

After the move, the mission has an active alarm. The last value triggered it. It was the second value above 6°C.