S2 MP
There are the following MP types handled by the S2 gateway:
Analogue input
1 – channel 1, V, mA or 0/1
2 – channel 2, V, mA or 0/1
3 – channel 3, V, mA or 0/1
S2/S2IOG2 analogue inputs. The unit can be V, mA or opened/closed (0/1) depending on the S2IOG2 HW version. The inices start with 1 because there is also temperature sensor in this type of node with index 0.
High Precision Temp 2408i
0 – temperature, °C
S2/2408i
Relative humidity
0 – rel. humidity, %
Standard S2 with digital RHT FT002-XX or FT003-XX sensor
Relative humidity
3 – rel. humidity, %
Relative humidity for Heraeus, Memmert, Galaxy, Innova 40 and HeraCell 150 incubators
Temperature
0 – temperature, °C
Standard S2 with FT04X-XX or FT011-XX digital temp sensor
Temperature
1 – temperature, °C
Standard S2 with digital RHT FT002-XX or FT003-XX sensor
Temperature
0 – temperature, °C
S2/S2IOG2 temp sensor
Temperature
0 – temperature input 1, °C
1 – temperature input 2, °C
S2/PT100 temp sensors
Temperature
2 – temperature, °C
Temperature for Heraeus, Memmert, Galaxy, Innova 40 and HeraCell 150 incubators
Concentration
4 – CO2, O2, RPM, unit is set during installation, % for CO2 and O2, rpm for RPM
Other parameters (CO2, O2, RPM) for Heraeus, Memmert, Galaxy, Innova 40 and HeraCell 150 incubators
The S2 MP has the following specific parameters:
Local ID
S2 radio node ID. Number from 2 to 254, unique for a given gateway. Entered manually.
Link 1, Link 2, Link 3
S2 radio path. Every field contains ID of S2 radio node used in the path starting from the first node PC node sends the message to. Unique, not repeating numbers from 2 to 254. The nodes used in the path must be present in the radio network.
Last updated