> For the complete documentation index, see [llms.txt](https://help.boomerang3.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.boomerang3.com/boomerang-3-calibration-app-manual/introduction.md).

# Introduction

This document is a user manual for the Calibration App, that offers an easy and integrated method to calibrate the temperature measuring points of the Boomerang 3 system. It can be also used to calibrate any other temperature sensor when used in manual mode.

The Boomerang 3 system is an automatic system logging and monitoring physical parameters like temperature, relative humidity, pressure etc. offered by ICU Scandinavia AB.

It makes monitoring and quality assurance of your laboratory simple, precise, and efficient.

The system automatically collects information about parameters, for example in refrigerators, freezers, incubators, and heating cabinets.

It triggers alarms if pre-set thresholds are exceeded. The alarm messages are delivered to designated contacts using defined methods like e-mail, SMS, voice mail etc.

It offers extended management including:

* user accounts with six levels of rights that enable a security system definition to reduce the human-related threats,
* multilevel administration groups to reflect the company or department structure,
* infrastructure to define the hardware elements that delivers the measurements to the system,
* alarms definition with alarm ranges defining the conditions and alarm groups defining the distribution.

The Boomerang 3 was developed basing on more than 20 years of experience in the field of automatic quality assurance.

ICU Scandinavia AB reserves the right to modify or update this document at any time without a notice.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.boomerang3.com/boomerang-3-calibration-app-manual/introduction.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.