# Cables routing

After removing the blue hinge cables can be easily routed as shown below.

A simple strain relief can be created by placing a cable tie wrap around the cable inside the enclosure, or between the enclosure walls in the cable slot as shown in the picture below.

<figure><img src="https://1398263718-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fe49zOmJ9qgXRcOoMVIir%2Fuploads%2FSIOEXuUihzPOnMfnj2xg%2Fimage.png?alt=media&#x26;token=e0cb4b13-79b3-499e-ac42-d98c1188b36d" alt=""><figcaption></figcaption></figure>

Install the hinge after cables are in place.
