# Cables routing

After removing the blue hinge cables can be easily routed as shown below.

A simple strain relief can be created by placing a cable tie wrap around the cable inside the enclosure, or between the enclosure walls in the cable slot as shown in the picture below.

<figure><img src="/files/N7TxKLgNzAFItmshT2QG" alt=""><figcaption></figcaption></figure>

Install the hinge after cables are in place.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.boomerang3.com/bbo-gateway-installation-manual/mechanical-installation/cables-routing.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.