# 1-Wire Interface

Click on “System Configuration”->”1-Wire Interface”.

 This page allows configuration of the 1-Wire interface, which is used to directly control the 1-Wire bus by sending ASCII commands to a TCP socket.

This feature is not used, do not change these settings.

<figure><img src="/files/BIyiAf5rAmtJNBXayjaZ" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.boomerang3.com/bbo-gateway-installation-manual/bbo-web-interface/system-configuration/1-wire-interface.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.