Static WAN address

To set the BBOB to a static WAN address:

  1. Open the BBOB web interface.

  2. Go to 'Network - Interfaces'.

  1. Click Edit in WAN section.

  2. Select 'Static address' in Protocol.

  1. Click 'Switch protocol' to confirm the operation.

  1. Enter the static IP address and the netmask you want to use.

  1. Click 'Save'.

  1. Click 'Save & Apply' to apply the pending changes.

  1. The BBOB uses static WAN IP address now.

PreviousConnect using terminalNextApplication upgrade

Last updated