# Introduction

This manual presents the BBO Buffer (called BBOB).

In case when the connection between B3 system and BBOs is broken the BBO Buffer stores the BBO readings. After the connection is restored, the measurements stored in BBO Buffer are transmitted to B3 system preventing any data loss.

The Boomerang 3 system is an automatic system logging and monitoring physical parameters like temperature, relative humidity, pressure etc.

It makes monitoring and quality assurance of your laboratory simple, precise, and efficient.

ICU Scandinavia AB reserves the rights to modify or update this document at any time without a notice.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.boomerang3.com/bbo-buffer-installation-manual/introduction.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.